柴油发动机喷油嘴L160PBC

柴油发动机喷油嘴L188PBC

柴油发动机喷油嘴L190PBC

柴油发动机喷油嘴L193PBC

柴油发动机喷油嘴L194PBC

柴油发动机喷油嘴L196PBC

柴油发动机喷油嘴L199

柴油发动机喷油嘴L241PBB

柴油发动机喷油嘴L244

柴油发动机喷油嘴L244PRD

柴油发动机喷油嘴L271PBC

柴油发动机喷油嘴L274PBD

柴油发动机喷油嘴L281PRD

柴油发动机喷油嘴L160PBC

The injection nozzle consists of the nozzle body the cone of which protrudes into the combustion chamber. The injection orifices through which the fuel is injected are bored in the nozzle cone. The number, configuration, length and diameter of these injection orifices permit the shape of the injection spray to be formed in a way that is ideally matched to the engine cylinder.

Inside the nozzle body is the nozzle needle which, when closed, blocks the injection orifices. For fuel injection, the nozzle needle is raised by the hydraulic servo system of the injector so that the injection orifices are opened. The faster the nozzle needle can be opened and re-closed, the more precisely the injection rate can be controlled.

高压共轨三阶段产品的主要技术特点有：全范围实现喷油精确闭环控制，油耗低；喷油正时控制精度高，采用预喷技术，噪声低；采用活塞冷却喷嘴，机油消耗率低；24V/12V电器系统，缸内预热，启动性能好；优化进气系统，采用中低涡流比的进气道，提高进气流量；技术改进燃烧室，提高燃烧组织的有效性采用密封和抗爆性能较好的金属汽缸垫，保证燃烧容积和压缩比一致，提高排放控制一致性和整机可靠性；采用供油压力180～220 MPa的国产高压共轨供油系统，保证有效组织燃烧，降低排放和噪声。GS 4NY3004 83 22 69

Injection nozzles for diesel engines inject the fuel into the combustion chamber, atomize it and seal the combustion chamber by means of the nozzle needle. In the Common Rail System, the injection nozzle is part of the injector.